Skip to content

POSM & Display Units

POSM Agency for Display Units, FSUs and Kiosks

Floor-standing units, counter displays, kiosks and custom retail furniture, prototyped, built and installed in stores.

01 / Scope

What's included

  1. Floor-standing units (FSUs)

    Freestanding display units that hold stock and carry your brand, built to fit store aisles and survive daily handling.

  2. Counter and shelf displays

    Countertop units, dispensers, shelf talkers, wobblers and shelf strips for the point of purchase.

  3. Kiosks and promotional counters

    Mall kiosks, sampling counters and demo stations, including portable versions for activations.

  4. Custom retail furniture

    Display tables, gondolas, wall bays and product podiums made to your store or shop-in-shop layout.

  5. Installation support

    Dispatch to stores, assembly on site and replacement of damaged units across cities.

02 / Overview

Display units that sell from the floor

Most shoppers decide at the shelf, so the unit holding your product has a big job. As a POSM agency, we design and build the displays that carry that load: floor-standing units, counter displays, kiosks and custom furniture that hold stock, show your brand and stand up to daily use in Indian stores.

We are fabricators as well as designers. Every unit is drawn, prototyped and built as one job, which means we can tell you early if a design will wobble, scratch or block an aisle. If you are new to the term, our explainer on what POSM means in marketing covers the basics.

What our POSM agency makes

Floor-standing units (FSUs). Freestanding units placed in the aisle or near the billing counter. They carry stock, branding and often a header or lightbox. Common in FMCG, beverages, personal care, electricals, lubricants and batteries.

Counter and shelf displays. Countertop units, dispensers, shelf talkers, wobblers, danglers and shelf strips. Small items, but they are often the last thing a shopper sees before choosing.

Kiosks and promotional counters. Mall kiosks, sampling counters and demo tables. We also build portable kiosks that fold down for transport between BTL activations.

Custom retail furniture. Display tables, gondolas, wall bays and podiums for shop-in-shop zones and branded stores, built to the measurements from a store recce. This often forms part of a wider retail branding rollout.

Installation support. We pack units for transit, dispatch them, assemble them on site and replace any that are damaged.

How we build display units

  1. Brief. Which products, how many SKUs, where the unit will stand and how long it needs to last.
  2. Design. Concepts and 3D renders, with product placement shown to scale.
  3. Engineering. Technical drawings, material choices, load checks and knock-down options for shipping.
  4. Prototype. A sample unit for you to test with real stock.
  5. Production. Batch manufacturing with checks on finish, dimensions and graphics.
  6. Dispatch and install. Delivery to stores or distributors, assembly, and photos per location.

Choosing the right material

Material choice decides how long a display lasts and what it costs. These are the trade-offs we talk through with clients:

  • MDF or plywood with laminate. Good for permanent indoor furniture and shop-in-shop units. Solid, easy to finish, but heavy to ship.
  • Metal (MS or SS frames). Suits heavy products such as batteries, lubricants, tiles and hardware. Strong and long-lasting.
  • Acrylic. Clean, premium look for cosmetics, eyewear and electronics counters. Needs care in transit.
  • Corrugated board. Light and cheap to produce for short promotions and seasonal offers. Not meant to last months.
  • Backlit and LED elements. Make a unit visible from across the store. They need a power point nearby and add to the cost.

We also think about what happens after the campaign. Units meant to stay in stores for a year need replaceable graphics, so a new offer or product range only means a new print, not a new unit.

Quantity, size, material, lighting, the number of cities and the delivery timeline are the main cost drivers. We quote once the brief and product dimensions are clear.

Designing displays for Indian stores

A display that looks good in a render can still fail in a store. Indian retail has its own conditions: narrow aisles in kirana and general trade outlets, shopkeepers who move units to make space, dust, heat, and transport over rough roads to smaller towns. We design with these in mind.

That means checking the footprint against real aisle widths, keeping the product at eye and hand level, adding a header that is visible from the store entrance, and making units knock-down where they need to travel far. For general trade, we keep the unit simple to restock, because the shopkeeper, not a merchandiser, will maintain it. For modern trade and malls, we follow the retailer’s fixture guidelines and get them approved before production.

Built by the team that builds exhibition stalls

We also fabricate exhibition stalls, so the same carpentry, metal and finishing skills go into your display units. That helps when a brand wants its trade-show look carried into stores, or needs a product display built for both a stall and the retail floor.

Brands from FMCG, building materials, consumer durables and automotive have worked with I Smart Media. See our work or share your product and store details to start a POSM brief.

POSM & Display Units: frequently asked questions

What is the difference between POSM and POP?

The terms are used almost interchangeably in India. POSM (point of sale materials) usually covers everything placed at or near the purchase point, from shelf strips to large floor units. Our guide on what POSM is explains the types in more detail.

Do you make a sample before full production?

Yes. For any new display unit we build a prototype first, so you can check size, finish, stability and product fit before we produce the full batch.

What is the minimum order quantity?

There is no fixed minimum. We build single custom units for flagship stores as well as batches for dealer networks. The cost per unit drops as quantity rises, because design and tooling costs are spread across more units.

Can you deliver and install display units in other cities?

Yes. We pack units for transport, dispatch them and coordinate installation from our Mumbai and Delhi offices, working with partner installers in other cities.

Which materials do you use for display units?

It depends on where the unit goes and how long it needs to last. MDF and laminate suit indoor furniture, metal frames take heavy products, acrylic works for premium counters, and corrugated board is used for short-term promotions.

Planning a show, store rollout or activation?

Share the brief, the venue and your dates. We will come back with ideas, a plan and an estimate.